科技分馆教师研究生阅览室经典藏书展示
1．外文图书部分
1.Lecture Notes in Computer Science丛书
TP3-532 LL1 1080 ～
Lecture Notes in Computer Science 丛书
Springer，1973开始出版
Lecture Notes in Computer Science丛书是施普林格出版社(Springer)自1973年以来出版丛书中的旗舰产品。它已成为高水平、采用非正式方式、在第一时间报道计算机科学领域研究和教育成果新进展的媒介
2002年，该丛书出版了280卷。 2003年出版了310多卷，以后每年出版卷数逐年增加。主题覆盖的领域包括：硬件和计算系统、网络、电信和分布式系统、程序设计、软件工程、计算机视图、模式识别、图像处理、密码学和资料安全、信息系统、人机交互、智能工程和计算机图形学等。
我馆从2001年(LNCS 1808～ )起到现在完整地收藏了Lecture
Notes in Computer Science这套计算机科学方面的重要丛书。
２．Proceedings of SPIE丛书
TN-532 LS1 1 ～
Proceedings of SPIE
SPIE,1963年开始出版
SPIE
(International Society for Optical Engineering，国际光学工程学会) 成立于1955年，是致力于光学、光子学和电子学领域的研究、工程和应用的著名专业学会。该学会每年举办超过350次的国际性技术研讨会以及各种短期课程和教学活动，所形成的会议文献反映了相应专业领域的最新进展和动态，具有极高的学术价值。
The Proceedings of
SPIE收录了自从1963年以来由SPIE主办的或参与主办的、超过6500卷的会议论文，汇集了大量原始的、新颖的、先进的研究记录。汇集了光学工程、光学物理、光学测试仪器、遥感、激光器、机器人及其工业应用、光电子学、图像处理和计算机应用等领域的最新研究成果，具有信息量大、报导速度快、涉及交叉学科领域广泛等特点，已成为光学及其应用领域科技人员极为重视和欢迎的情报源，是国际著名的会议文献出版物。
我馆从1963年(vol.1～ )起到现在比较完整地收藏了SPIE会议录这套光信息工程方面的重要丛书。
3.管理学——全球化视角（第11版）（英文影印版）
C93 LW2-11
Management : a global perspective /
Heinz Weihrich, Harold Koontz = 管理学 : 全球化视角
著者 海因茨·韦里克, 哈罗德·孔茨.
Economic Science Press, 2005出版
本书作者韦里克教授和孔茨教授是国际管理学界享有盛誉的管理理论大师，由韦里克教授创建的SWOT分析是目前所有管理类图书涉及战略实施时广泛采用的方法。1993年作为全球畅销书的《管理学》(第九版)由我社引进版权，1998年又推出了第十版，一直畅销不衰。许多重点高校将其作为工商管理专业研究生入学考试的指定教材。
为使《管理学--全球化视角》(第十一版)中文版准确表达出原版管理学的理论精要，韦里克教授亲自邀请他当年的学生，现中国著名的管理学家。对外经济贸易大学国际工商管理学院马春光教授作为译者，马教授在管理学方面深厚的造诣为本书增色不少。
本书共计6篇20章，第1篇讨论了全球化的理论和实践基础，第2-6篇重点讨论了计划。组织、人员、领导、控制的管理职能。每篇结束语的内容都包括富有挑战性的"国际聚焦"与"全球化汽车产业案例"，并对中国，日本和美国在管理职能方面的具体做法进行了比较，使本书名副其实地成为管理理论与实践的全球化视角。
４.Corporate
financial management，3nd Ed
F273 LA1-3
Corporate financial management, 3nd Ed
By Arnold, Glen
Harlow, England ; New York :
Financial Times/Prentice Hall, c2005
Corporate Financial
Management is a thorough and comprehensive introduction to corporate finance,
set within a realistic and practical based context. It provides extensive
coverage of financial decision making within the firm and explains the
financial markets in a highly accessible manner. The emphasis is on connecting
finance theory to practical management.
The core theoretical principles of
corporate financial management are explained with rigor and clarity and given a
strong real world relevance through the use of Financial Times articles,
vignettes and mini case studies. This book is suitable for second and third
year undergraduate students of business studies, accounting, finance, and economics
. It is particularly valuable for those studying MBA and MSc. in business
courses
5.Research problems in discrete geometry = 离散几何中的研究问题
O18 LB1
Research problems in discrete geometry = 离散几何中的研究问题
著者 Peter Brass,
William Moser, Janos Pach.
科学出版社, 2007出版
离散几何有着150余年的丰富历史，提出了甚至高中生都能理解的诸多公开问题。某些问题异常困难，并和数学其他领域的一些深层问题密切相关。然而，许多问题，甚至某些年代久远的问题，都可能被聪明的大学本科生或者高中生运用精妙构思和数学奥林匹克竞赛中的某些技巧所解决。
《离散几何中的研究问题》是由Leo Moser牵头，花费25年著成，书中包括500余个颇具吸引力的公开问题，理解其中许多问题并不需要太多的准备知识。书中的各章很大程度上内容自含，概述了离散几何，介绍了各个问题的历史细节及最重要的相关结果。
本书可作为参考书，供致力数学研究，热爱美妙数学问题并不遗余力地试图加以解决的那些专业数学家和研究生查阅。..
６．Advances in Fluid Mechanics VI
TB126-532 LI1
2006
Advances in
Fluid Mechanics VI
By M. RAHMAN
Southampton : WIT Press, c2006.
This book covers a
wide range of edited papers in the areas of fluid mechanics presented at the
Sixth International Conference on Advances in Fluid Mechanics held on the
beautiful island of Skiathos, Greece, 8-10 May 2006. The conference was organized
by the Wessex Institute of Technology, UK and Dalhousie University, Canada, and
was sponsored by the WIT Transactions on Engineering Sciences. The conference
emphasizes the advancement of knowledge in fluid mechanics problems with novel
applications. The basic mathematical formulations and their solutions by
analytical and numerical methods are discussed together with physical modelling.
This conference has
been reconvened every two years since 1996 and was motivated by the success of
previous Meetings and the well-established book series, Advances in Fluid
Mechanics. The Scientific Advisory Committee is composed of the experienced and
professional Editorial Board Members of the book series. The conference was
first held in New Orleans, USA (1996), then in Udine, Italy (1998); in
Montreal, Canada (2000); in Ghent, Belgium (2002), and in Lisbon, Portugal (2004).
World renowned Scientists, Engineers and Professionals from around the world
participated and presented their latest findings in various topics of Fluid Mechanics.
This book should be
of interest to all researchers in fluid mechanics. It contains the following
sections:
Computations
methods in fluid mechanics; Experimental versus simulation methods; Hydraulics
and hydrodynamics; Fluid structure interaction; Convection, heat and mass
transfer; Boundary layer flow; Multiphase flow; Non-Newtonian fluids; Wave
studies; Industrial applications; Turbulence flow; Biofluids and Permeability problems.
The Editors are
very grateful to the contributors as well as to the Board Members for their
enthusiastic support and participation in the Meeting. We are also thankful to
the staff of the WIT Press for their excellent job in producing such a superb
book.
7.Theory
of machines and mechanisms, 2nd Edition
TH113 LS1-2
Theory of machines and mechanisms,
2nd Edition
By Joseph Edward Shigley , John
Joseph Uicker, JR
McGraw-Hill,c1995
Theory of Machines and Mechanisms provides the foundation for
the study of displacements, velocities, accelerations, and static and dynamic
forces required for the proper design of mechanical linkages, cams, and geared
systems. The authors present the background, notation, and nomenclature
essential for students to understand the various and independent technical
approaches that exist in the field of mechanisms, kinematics, and dynamics.
Coverage of all analysis and development methods is balanced, with the use of
both analytic and graphic tools.
This text is ideal for senior or graduate students studying
mechanical engineering, taking a kinematics and/or machine dynamics course.
Features BLIncludes an introduction to kinematic coefficients, which clearly
separates kinematic (geometric) effects from operating speed and other dynamic
dependences, and unifies the coverage of linkages with that for cams and geared
systems BLContains entirely new chapters on the analysis and design of
flywheels, governors, and gyroscopes BLProvides graphical and analytical
solutions to exercises, now verified by professional CAD software with an
accuracy rate of better than one percent BLOffers new, quality illustrations,
now in two colors BLSolutions Manual and PowerPointRG Overheads available to
adopters only
8.Metal fatigue in engineering, 2nd ed.
TG111.2 LM1-2
Metal fatigue in engineering, 2nd ed.
Wiley, c2001
For twenty years, Metal Fatigue in Engineering has served as an important
textbook and reference for students and practicing engineers concerned with the
design, development, and failure analysis of components, structures, and
vehicles subjected to repeated loading.
Now this generously revised and expanded edition retains the best features
of the original while bringing it up to date with the latest developments in
the field.
As with the First Edition, this book focuses on applied engineering
design, with a view to producing products that are safe, reliable, and
economical. It offers in-depth coverage of today’s most common analytical
methods of fatigue design and fatigue life predictions/estimations for metals.
Contents are arranged logically, moving from simple to more complex fatigue
loading and conditions. Throughout the book, there is a full range of helpful
learning aids, including worked examples and hundreds of problems, references,
and figures as well as chapter summaries and "design do’s and don’ts"
sections to help speed and reinforce understanding of the material.
The Second Edition contains a vast amount of new information, including:
- Enhanced coverage of micro/macro fatigue
mechanisms, notch strain analysis, fatigue crack growth at notches,
residual stresses, digital prototyping, and fatigue design of weldments
·
Nonproportional loading and
critical plane approaches for multiaxial fatigue
·
A new chapter on
statistical aspects of fatigue
9.
Heat Transfer,9nd ed
TK124 LH1-9
Heat
Transfer,9nd ed
By J.
P. Holman
McGraw-Hill, c2002
Building on its
tradition of clarity and numerous examples and problem sets, this new edition
of Heat Transfer also recognizes the trend toward design and includes the use
of computers to assist students in problem solving.
10. Power system protection
TM77 LA1
Power system protection
By P.M.
Anderson.
McGraw-Hill , IEEE Press,c1999
"In a world of huge, interconnected networks that
can be completely blacked out by disturbances, POWER SYSTEM PROTECTION offers
you an improved understanding of the requirements necessary for prompt and
accurate corrective action. P. M. Anderson, a noted expert on power systems,
presents an analytical and technical approach to power system protection. His
discussion shows how abnormal system behavior can be detected before damage
occurs, and points to effective control action to limit system outages.
Advance your knowledge of power system protection through
a better understanding of:
·
Protective devices and
controls
·
Protection concepts
·
Transmission protection
·
Apparatus protection
·
System aspects of protective
systems
·
Reliability analysis of
protective systems
POWER SYSTEM PROTECTION is expressly written for
practicing engineers and advanced graduate-level student engineers who need a
comprehensive resource on the principles of power system behavior. This
essential reference work provides new and advanced concepts for understanding
system performance."
11.Precision temperature
sensors in CMOS technology
TN432 LP1
Precision temperature
sensors in CMOS technology
By Michiel
A.P. Pertijs , Johan
H. Huijsing.
Dordrecht, Netherlands : Springer, c2006.
This book describes the analysis and
design of precision temperature sensors in CMOS IC technology. It focusses on
so-called smart temperature sensors, which provide a digital output signal that
can be readily interpreted by a computer. The sensors described in this book
are based on bipolar transistors, which are available as parasitic devices in
standard CMOS technology. The relevant physical properties of these devices are
described. It is shown in detail how their temperature characteristics can be
used to obtain an accurate digital temperature reading. A sigma-delta converter
plays a key role in the conversion to a digital output. Both the system-level
design of such a converter, and the circuit-level implementation using both
continuous-time and switched-capacitor techniques are described. Special
attention is paid to the application of precision interfacing techniques, such
as dynamic offset cancellation and dynamic element matching. A separate chapter
is devoted to low-cost calibration techniques. Precision Temperature Sensors in CMOS
Technology ends with a detailed description of three
realized prototypes. The final prototype achieves an inaccuracy of only ±0.1ºC
(3Sigma) over the temperature range of –55ºC to 125ºC, which is the highest
performance reported to date.
12. Algorithm design = 算法设计(英文影印版)
Tp301.6 LK1
Algorithm design = 算法设计
清华大学出版社, 2006年出版
13. Process dynamics and control : modeling for control
and prediction
TQ02 LR1
Process
Dynamics and Control: Modeling for Control and Prediction
John Wiley & Sons, c2006
Offering a different approach
to other textbooks in the area, this book is a comprehensive introduction to
the subject divided in three broad parts. The first part deals with building
physical models, the second part with developing empirical models and the final
part discusses developing process control solutions. Theory is discussed where
needed to ensure students have a full understanding of key techniques that are
used to solve a modeling problem.
Hallmark Features:
·
Includes worked out
examples of processes where the theory learned early on in the text can be
applied.
·
Uses MATLAB simulation
examples of all processes and modeling techniques- further information on
MATLAB can be obtained from www.mathworks.com
·
Includes supplementary
website to include further references, worked examples and figures from the
book
This book is structured and aimed at upper level
undergraduate students within chemical engineering and other engineering
disciplines looking for a comprehensive introduction to the subject. It is also
of use to practitioners of process control where the integrated approach of
physical and empirical modeling is particularly valuable.
14.Piano
: Renzo Piano building workshop 1966-2005 TU-865.46 LJ1
Piano
: Renzo Piano building workshop 1966-2005
By Jodidio, Philip
Koln
Los Angeles : Taschen, c2005
A tension runs through the work of Renzo Piano. Born in
1937 into a prominent family of Genoese builders, he has long stressed his
commitment to craft, to the particularities of material and making, and, though
his firm has multiple offices with international projects, it is still called
Building Workshop. Yet Piano burst into public view with the Centre Pompidou
(1971-77), which, designed with Richard Rogers, is the most celebrated of the
high-tech megastructures of the period, and today he is also associated with
large urban schemes, including the redevelopment of the old harbour in Genoa
(1985-92) and Potsdamer Platz in Berlin (1992-2000), as well as massive
infrastructural projects such as Kansai International Airport (1988-94), for
which an entire island was engineered into being in the Bay of Osaka.
15. Water resources :
environmental planning, management
TV213.4 LW2
Water resources :
environmental planning, management, and development
By Asit K. Biswas
New York : McGraw-Hill,
c1997.
This
state-of-the-art reference offers water resource and environmental
professionals international coverage of water quality management and
environmental issues, including the environmental impact of water development.
Featuring contributions by experts from nine countries, this book presents the
latest concepts and data on waterlogging and salinity, sedimentation, land use,
eutrophication, fisheries, and aquatic weeds. Readers will also get information
on social impacts, economic instruments, initiating environmentally responsible
projects, water quality modeling and monitoring, water reuse, and more.
16. Environmental
physics
X12 LS1
Environmental physics
By Clare
Smith
Routledge, c2001
Environmental Physics is a
comprehensive introduction to the physical concepts underlying environmental
science. The importance and relevance of physics is emphasised by its
application to real environmental problems with a wide range of case studies.
Applications included cover energy use and production, global climate, the
physics of living things, radioactivity, environmental remote sensing, noise
pollution and the physics of the Earth. The book makes the subject accessible
to those with little physics background, keeping mathematical treatment
straightforward. The text is lively and informative, and is supplemented by
numerous illustrations, photos, tables of useful data, and a glossary of key
terms.
2．中文图书部分
1.非线性随机动力学与控制-Hamilton理论体系框架
O316
CZ1
非线性随机动力学与控制-Hamilton理论体系框架
著者 朱位秋
科学出版社 ；2003年出版
本书在较详细地介绍Hamiltm系统与扩散过程基础上，系统而深入地论述了随机激励的耗散的Hamilton系统理论，包括Gauss白噪声激励下耗散的Hamilton系统的精确平稳解与等效非线性系统法、拟Hamiltion系统随机平均法、拟Hamilton系统的随机稳定性、随机分岔、首次穿越以及分别以振动最小、稳定度或可靠度最大为目标的非线性随机最优控制。
2.原子经济性反应
O621.25 CM2
原子经济性反应
著者 麻生明 等
中国石化出版社；2006年出版
本书着重于2000年以后该领域的最新进展和我国化学家在此方面的贡献，选择性地对其中具有重要意义的7个方面进行了系统的探讨。首先对原子经济性反应的基本概念和取舍原则做了简述，然后分别对原子经济性的氧化反应、催化的加成反应、周环反应中具有代表性的Diels－Alder反应和ene反应、过渡金属催化的［2＋2＋2］环加成反应和胺氢化反应、C—H键活化反应和自由基反应进行了详细的讨论。该书通过列举大量已报道的最新成果，充分反映了当前有机化学中原子经济性反应的动态，对于新的原子经济性反应的设计具有明显的指导意义。
3.新编有机合成化学
O621.3 CH1
新编有机合成化学
化学工业出版社；2003年出版
本书介绍了各种合成新反应、新试剂、新合成技术的特点和应用范围，并对所列的各种方法均注明原始文献，便于读者进一步检索。对那些精典的和经过改进的方法，补充了近年的新文献；对近20年发展起来的各种新方法，作以更为详细的介绍。 全书共分17章，500多种实用的合成方法，列举参考文献3000余篇，内容精练，文字叙述简明扼要。
4.超分子层状结构 -- 组装与功能
O631.1 CS1
超分子层状结构 -- 组装与功能
著者 沈家骢
科学出版社；2004年出版
本书集沈家骢院士研究集体及合作者近10年的科研积累，详细介绍了超分子结构与功能这一交叉前沿领域的研究成果及发展趋势。内容包括一维、二维及三维层状组装技术，界面组装与表面图案化，无机/有机纳米复合体，新型超分子构筑基元，分子间相互作用的单分子力谱研究等。
5.微流控分析芯片的制作及应用
O652.9 CF1.1
微流控分析芯片的制作及应用
著者 方肇伦
化学工业出版社；2005年出版
本书全面系统地介绍了该领域国内外的发展状况和最新成果。全书共分9章，详细介绍了微流控芯片的制作和加工技术，分章对微流控芯片上的微泵阀与微反应器、系统实验参数测量、微流体控制、检测系统和集成化等技术进行了介绍，并对微流控芯片系统在生命科学领域的应用专章进行了详细说明。
6.工业过程控制技术 ; 方法篇
TB114.2 CS3 1
工业过程控制技术 ; 方法篇
化学工业出版社；2006年出版
本书从工程应用的角度出发,系统地介绍了工业自动化技术的主要控制方法和控制系统,其中包括自适应控制、模型预测控制、模糊控制工业过程专家控制、神经网络控制、非线性控制、时滞系统控制、软测量技术、数据校正、综合自动化系统和过程,计算机控制系统。这些方法和系统自成体系,又相互关联。本书内容新颖,有不少例子取自工程实际,并兼顾了自动化理论的新发展与工程实际的需要。
7.力电失效学
TB4 CY1
力电失效学
著者 杨卫
清华大学出版社；2001年出版
本书按照电致失效学、力电耦合学、力电畴变学和质流失效学的顺序来阐述力电失效学这一学科分支的主要内容。
8.腐蚀电化学原理 第二版
TG174.41
CC1-2
腐蚀电化学原理
第二版
著者 曹楚南
化学工业出版社;2004年出版
本书系统地阐述了腐蚀电化学的基本原理和研究方法。书中首先深入浅出地讨论了电极电位等基本概念和腐蚀电极的反应速度、反应过程等基本原理；其次，系统地讨论了腐蚀电化学的研究方法——稳态测量、瞬态测量和电化学阻抗谱，尤其对电化学阻抗谱的基本原理和方法进行了深入阐述。然后，应用腐蚀电化学的基本原理和方法，讨论了缓蚀剂吸附、金属钝化和局部腐蚀等现象和过程。最后，概述了电化学实验技术，推介了比较新颖的Kelvin探头。附录中列举了腐蚀电化学研究中常用的数据。
9.液压气动技术手册
TH137-62 CL2
液压气动技术手册
路甬祥 主编
机械工业出版社;2002年出版
本手册共六篇。第一篇介绍液压与气动系统中的流动理论和流体力学基本公式。第二篇介绍经典和现代控制理论以及流体参数的机械量的测量，液压系统的监测与故障分析。第三篇和第四篇分别介绍了液压、气动系统的工作介质及动力源；主要液压、气动元件的辅件的结构和工作原理；液压、气动系统基本回路和系统设计方法。第五篇向读者提供了若干液压，气动应用系统的实例。第六篇是参考资料篇，包括设计理论与方法，液压、气动图形符号及名词术语等。
10.电力电子技术
TM1 CX4.1
电力电子技术
科学出版社；2006年出版
本书主要内容包括：电力电子器件基本特性与使用方法，隔离与非隔离的直流一直流变换电路的原理和分析方法、动态模型及其控制，直流一交流变换技术，交流一直流变换技术，交流一交流变换技术，软开关谐振变换技术，磁芯元件及其应用基础，电力电子技术的应用等。
11.基于分叉理论的电力系统电压稳定性分析
TM761 CP1
基于分叉理论的电力系统电压稳定性分析
著者 彭志炜 胡国根 韩祯祥
中国电力出版社；2005年出版
本书利用分叉理论，并结合算例，对电力系统电压稳定性有关问题进行了系统的分析讨论。主要内容包括：动态电力系统电压失稳机理、稳定性的分析方法、负荷特性对电压稳定性的影响、励磁调节器对电力系统电压稳定性的影响、无功补偿对电压稳定性的影响、交直流系统电压稳定性、电压稳定与同步稳定的关联性以及如何提高电力系统电压稳定性等问题。
)
TN252 CC1
微波与光导技术教程
著者 陈抗生
浙江大学出版社；2000年出版
本书从麦克斯韦(Maxwell)方程出发证明，就波的纵向传播而言，各类波导都可用传输线等效；而在与波传播方向垂直的横向，可用一网络表示．波导的等效电路模型在本书分析各类波导时反复得到应用，其优点是便于已熟悉阿络理论与技术的电子工程技术人员理解．
各类实用的微波、光波导，尤其与器件连接的部分，边界条件很复杂，解析解很难得到，一般要借助计算机进行数值模拟． 电磁问题的数值模拟在微波与光导波技术研究中越来越重要．本书尽力把所研究的问题表示成计算机可求解的形式，并推荐Matlab作为首选的应用软件．如读者需要，作者可提供部分数值模拟程序．
13.计算机图形学 ; 原理、方法及应用
TP391.41 CP12-2
计算机图形学 ; 原理、方法及应用
高等教育出版社;2003年出版
本书主要内容包括计算机图形学基本知识,基本图形生成与计算,图形变换与输出,图形输入与交互技术,图形数据结构,数据接口与交换标准,真实感图形显示,自由曲线曲面,基本造型方法,实体造型中的基本算法及特征造型,计算机图形学的应用,实用CAD系统介绍等。
14.气固分离理论及技术
TQ028.2 CC1